When it comes to stamping molds, it is known that they are produced by metal stamping manufacturers through stamping processing. Metal stamping molds are a special process equipment used by metal stamping manufacturers to process materials such as metals or non metals into parts through cold stamping processing.

Stamping is a pressure processing method that uses mold materials installed on a press machine to apply pressure at room temperature, causing separation or plastic deformation to obtain the desired parts. In stamping technology, there are many forms of metal stamping molds, and stamping dies are classified according to the nature of the work, the structure of the mold, and the mold material.

According to the nature of the process, it can be divided into the following points:
1. Punching die. A mold that separates material production along a closed or open contour line.
2. Bending mold. A tool mold that causes bending deformation of sheet metal blanks or other blanks along straight lines, bending curves, etc., in order to obtain a certain angle and shape.
3. Deep drawing die. A mold that makes blank sheet metal into open hollow parts, or further changes the shape and size of the hollow parts.

In addition to the above types, hardware stamping parts manufacturers also have forming molds, riveting molds for hardware stamping molds, and other types of stamping molds. Regardless of the type of mold used, hardware stamping manufacturers will choose to design and process according to the needs and requirements of users.